[email protected] for expert advice contact us today


  • Login

    Product was successfully added to your shopping cart.


    Product was successfully added to your compare list.


    Product was successfully added to your wishlist.


    Flowrite Livewell 30L Assembly - System 4 Kit and 30L Tank

    Availability: In stock

    System 4 Kit - Actuator, valve, cable, hose and fittings


    Kit Includes: 

    • 30 Litre tank

    • Access Hatch 270 x 375

    • Strainer Snap in 3/4" x2

    • Qwik-Lok Thru hull straight 3/4" Black

    • System 4 valve F

    • Flowrite control cable

    • Qwik-Lok Thru hull elbow 1 1/8" 

    • Qwik-Lok socket straight 3/4" x7 

    • Qwik-Lok socket elbow 3/4" 

    • Qwik-Lok socket straight 1 1/8" x2

    • Oetiker crimp clamp 3/4" x8 

    • Oetiker crimp clamp 1 1/8" x2

    • Pump out aerator operation label

    • Label system 4 operation

    • Flowrite System 4 actuator

    • Flowrite hose 3/4" 4m

    • Flowrite hose 1 1/8" 2m 

    • Pump Out aerator combo Qwik-Lok 

    • Qwik-Lok Thru hull pumpout 3/4" Black

    • Rule tournament Livewell Pump 800 GPH

    • Thru hull Qwik-Lok 1 1/8" Straight Black

    • Valve Mounting Bracket U shape

    • Qwik-Lok adaptor for rule of tournament pump 


    SKU: 8693



    his kit includes one 750GPH angled Johnston Pump - that circulates water into the tank (generally mounted through the hull / transom).. The water is aerated through a Pump Out Aerator. Finally, the water can be drained through the bottom of the tank via gravity, or it can be pumped out using the pump unit. Additionally, this kit comes with an overflow hose to stop over filling. This hose can be mounted to drain into the bilge or over the side.

    The kit comes with a flow rite system 4 valve and corresponding actuator dial, using these items the user can select to either “FILL” the tank, where the valve will close the livewell drain side of the vale so the pump has access to fresh water outside the vessel. This water is then pumped into the tank. Once the tank is full the “RECIRC” option may be used to circulate water from the tank through the pump and through the aerator. Additionally this setting may be used to drain the tank when the pump out option is enacted through the aerator. Finally, the “EMPTY” function allows water to drain through the valve and exit the boat, while a one way return chamber in the valve stops water re entering the system.

    This kit comes with a standard 8’ (243cm) control cable, 2M 3/4” hose and 1.5M 1 1/8” Hose





    System 4 Kit - Actuator, valve, cable, hose and fittings

    For that tournament standard feel of a casting/fishing deck with direct livewell access. Mounted directly through your casting/fishing deck and supplied with a low profile access hatch. The access hatch lid has an anti-slip lid and is reinforced for you to stand on during those moments of high excitement. 
    The top of each tank body has been thickened so the hatch can be fastened directly through the deck and into the tank body. 
    The tanks can be installed with either metal threads or rivets. 


    A pump-out feature provides a convenient means of filling a tournament livewell weigh-in bag and also enables a livewell to be pumped out while the boat is still in the water or when moored at a dock overnight.

    The Flow-Rite Pump-Out Aerator is the easiest, most efficient, and least expensive means of adding a pump-out system to any livewell system. It eliminates the need for additional diverting valves, cables, actuators, electrical connections and most of the plumbing required by other systems. Simply install the Pump-Out Aerator in place of the standard spray head used with any recirculation pump or with any of our V3 or V4 control valves that include a “RECIRC” mode. It has two hose connections, one intake from the pump and one outlet for the discharge hose that will connect to the new discharge thruhull fitting.