Rubber handled ratchet tiedown with webbing style strap and nylon coated S hooks.

The specially designed shorter length between ratchet and S hook allows the ratchet to be mounted closer to the trailer and helps prevent rubbing on boat hulls.

With a new Cartridge you'll be able to upgrade the output of your bilge pump in minutes, cleaning debris from the impeller your new pump will be better than ever. Available in two sizes

Manufactured from high quality, UV proof marine grade nylon and tinned copper wire.

Each LED circuit board is resin sealed, made with non corrosive materials and ensures that each light shines with clarity through the impact resistant diffused lens.

12 month warranty against manufacturing defects and materials.

 
5152 , 5152W

Powered Box with Volt Metre, 2 x 12V sockets and Powered Lugs with supplied webbing style strap

Robust black plastic boxes to suit popular sizes of batteries.

The Powered Box offers two powered terminals (8mm) Negative and (10mm) Positive - with corresponding color coded wing nuts. In addition, the Lid houses 2 x Cigarette style power ports, commonly used by many 12v applications. Back lit digital volt meter reads voltage to one decimal point. Simply push the button to engage the screen. Complete with a circut breaker to prevent voltage surges and blow outs.

Reinforced base allows the battery to be transported by the molded carry handles on each end of the box.

Additionally the Box has a hinged handle on the lid to allow easy removal and replacement.

Supplied with webbing style strap, nylon saddles, stainless steel fasteners and adjustable buckle for the box to be secured to the floor and removed easily.

Specifications

• Inside Length: 315mm


• Inside Width: 190mm


• Inside Height: 235mm


• Outside Height: 320mm

Smaller boats and outboards up to 70hp are a significant financial investment. In these modern times extending engine life, improving efficiency and improving performance is becoming more important.

For too long this segment of marine outboards has relied on basic fuel filtration.

Finer particles and water emulsion will evade the capabilities of basic filtration, exposing the engine to accelerated wear which contributes to loss of power and loss of economy.

WaterScreen is focused on maximising engine life and fuel efficiency for you via the optimal engine protection that only WaterScreen can give you.

TOTAL HEIGHT : 180mm
TOTAL WIDTH : 80mm
SUITS 2 AND 4 STROKE ENGINES 
MULTIPLE FUEL LINE CAPABILITIES 
10 MICRON FILTRATION CAPACITY 
UP TO 50GPH FOR SUCTION SIDE APPLICATIONS. 

Components

Nano Element Fuel Filter
The Nano will separate water on the run. This is unique to the Nano assembly. Other small filters will filter particles and yet fail to separate the water out, relying on gravity assistance or sedimentation to get the water out of the system.The Nano addresses the needs of the modern small outboard motor, protecting the highly tuned tolerances from contamination and maximizing your engine life

Replacement Clear bowl 
The Nano's design will deposit unwanted water emulation in to the clear inspection bowl. You can at any time visually inspect your fuel and immediately drain any water contamination from your fuel system. You no longer need to wait for sedimentation or risk running water emulation in your fuel. 
The Nano system keeps the water emulation separate. 

Nylon Fuel Filter Head 
Screw on fitting to suit Nano Element Fuel Filter
Inert and Non-corrosive  

Bilge Pump 1100GPH

1100GPH Bilge Pump with 1 1/8" barb outlet.
The snap-on strainer base makes for simple installation. 12 month warranty against defects in materials and workmanship.

1 1/8" Hose

This hose will not perforate or leak on plastic ridges like plastic cuffed hose.Our hose is premium Marine Bilge Hose, 2M of high quality durable 1 1/8" hose, flexible PVC with special smooth outer for secure fitting of clamps. No need for cuffs, smooth all the way. Our hose is reinforced internally with a rigid PVC helix.

Hose Clamps

High quality stainless steel banded hose clamps with a stainless steel nut and worm drive

Hi-Nylon 1 1/8" Skin Fittings

Exclusively made by Marine Warehouse, these hull/skin fittings are virtually indestructible. They feature high impact, UV resistant nylon skin fitting. A low profile snag free head complete with tension lugs for tightening of the over sized nuts.

Kit Includes:

• 1x 1100GPH Bilge Pump
• 2M of 1 1/8" Hose
• 2x Hose Clamps (16mm - 32mm)
• 1x Hi-Nylon 1 1/8" Skin Fitting
• Screw Holes: 4.5mm